PT on the Net Research

Core Stability in Cycling and Running

The core is where the most of the body’s power is derived. It provides the foundation for all movements of the arms and legs. The core must be strong, have dynamic flexibility and function synergistically in its movements in order to achieve maximum performance. Motion of the human body is not isolated to one muscle or tissue moving in one specific direction. Rather, it is a complex event involving agonists and antagonist structures that work together to create changes in position and/or location, and to stabilize the body in all three directional planes. Regardless of what sport one plays, it is essential to have core strength and trunk stability to maximize performance and prevent injury.

What Makes Up the Core

The foundation of the core is much more than the abdominal muscles. It includes muscles deep within the torso, from the pelvis up to the neck and shoulders. The core includes the following structures:

These abdominal muscles work together to transmit a compressive force and act to increase intra-abdominal pressure that stabilizes the lumbar spine. They also work individually to perform trunk rotation, while the internal and external obliques on the same side can work synergistically to laterally flex the spine.

Training the Core

The common myth is that training the core simply involves sit ups and back extensions. An efficient core routine consists of multiplanar movements. As the body moves, the center of gravity changes, and forces exerted by and on the body’s tissues are constantly changing. Dynamic stabilization must be included to increase proprioception and stability in the trunk as well as in the rest of the body. This allows the parts of the body to react efficiently to external forces and stresses such as gravity, changes in terrain and carrying loads. It also allows the body to react to internal forces exerted by other muscles.

Dynamic stability is best achieved through training in functionally practical positions that mimic activities or movements in one’s particular sport or in life as a whole. With this in mind, one can conclude that most core training that is done while sitting or lying down and limiting pelvic movement has little functional value.

Medicine balls, balance boards and stability balls are great tools for core training and should be integrated into every program. Core exercises should include strengthening as well as challenges such as standing one-legged and/or two-legged on stable and unstable surfaces, reacting to external forces such as a partner’s light push or the catching and throwing of a medicine ball and moving the joints of the body through all planes of motion. (For examples of all of these exercises, please see the PTN Exercise Library.)

The goal of functional core training is to develop in the core a system of efficient automatic responses to work as a stable base from which to generate optimal force and motion.

Postural Distortion and Biomechanical Dysfunction

Consider how the chronic shortening of just one muscle, which happens to be a core muscle, can impede performance and cause imbalances that lead to injuries.

The rectus abdominis is a good example of an overworked muscle. As this muscle is overworked, the other core muscles are often ignored. Crunches, leg raises and exercises using abdominal machines all work only in the sagittal plane, therefore limiting any benefit to muscles that produce hip and trunk flexion. (Note that repetitive trunk flexion places increased injury-causing stress on the intervertebral discs of the lumbar spine). Therefore, it is imperative to train the core in a multiplanar fashion, especially in the transverse plane, in order to create stabilization in the trunk and in effect more optimal posture, strength and motion in the entire body.

The following is a common example of the result of overworking the rectus abdominis. A tight rectus abdominis, when creating tension or pull on its upper and lower attachments including the anterior pelvis, anterior ribs and inferior sternum, produces a flexion force in the trunk.
This has consequences beyond the immediate structures affected. The consequences include a chain of effects that begin with shortening and tightening of the pectoral muscles. These muscles will exert an inferior tension on the clavicle, superior ribs and the anterior scapula and will assist in internally rotating the humerus. 

The force of gravity also contributes to the internal rotation of the glenohumeral (i.e., shoulder joint) as the trunk flexes forward. Internal rotation of the humerus tensions and lengthens the external rotators of the shoulder that, in combination with the tension exerted on the anterior scapula by the pecs, will bring the scapula into protraction, lengthening and weakening the middle and lower trapezius and rhomboid muscles. (Note that a tight latissimus dorsi can also be a primary contributor to internal rotation of the humerus.) The internally rotated humerus and protracted scapula will place the rotator cuff muscles at a biomechanical disadvantage in dynamically stabilizing the glenohumeral joint. The rotator cuff will not function effectively, increasing the risk of injury.

The reaction at the cervical spine is two fold. The lower segments of the cervical spine follow the forward and downward movement of the trunk, and they themselves flex, causing lengthening and weakening of the deep cervical flexor muscles. (This can also stress the outer layer of the intervertebral discs, which over time may lead to injury.)

Naturally, if the lower cervical spine flexes forward, the head will follow, and if this force is not countered, gravity will cause the head to fall forward. In order to prevent this from happening, tension will develop in the cervical extensors, including the upper trapezius, splenius, semispinalis, spinalis and sub-occipital groups that attach to the base of the skull. The upper cervical segments including the base of the skull are extended, shortening the sub-occipital muscles. This extension will allow the skull to remain somewhat level as it rests on the atlas (i.e., the uppermost cervical vertebra).

The over working of the upper trapezius muscle and lengthening and weakening of the middle and lower trapezius and the rhomboids will also contribute to early elevation of the scapula with shoulder motion. This will worsen the position of the glenohumeral joint and will further stress the rotator cuff.

The example I have illustrated has been limited to the rectus abdominis. It is important to understand that single muscles are rarely the isolated culprits in postural distortions and biomechanical dysfunction. (An exception would be an acute specific muscle injury that has not healed correctly and has caused compensatory overloading in other areas.) Because muscles act synergistically and as agonists and antagonists, there is usually more than one contributor. There are also connections between muscles through tough fascial connective tissue, which help to transmit forces between tissues. These cases of dysfunction can be rooted in other parts of the body, as the musculoskeletal system functions as a whole.

Not only will these faulty positions and compensatory biomechanics cause an athlete to move inefficiently. Over time, they may lead to degenerative processes in the soft tissues and joints that will lead to further injury and impairment.

The neurological system also adapts to these changes, applying muscle memory, as it controls the musculature. Training this system is essential in developing healthy neurological pathways and muscle firing patterns. This is achieved through the methods mentioned above such as using medicine balls, balance boards and stability balls and challenging the neuromuscular system.

Any of the muscles mentioned above may be the source of dysfunctional patterns, but it will most likely be a combination of them that will be the cause. It is important to follow the entire kinetic chain when assessing and treating these conditions.


Most cyclists focus on their hamstrings, quadriceps and gluteal muscles and forget about the importance of core stability. Consider how many hours a cyclist spends bent over in a flexed position on the aero bars, with no rotational or side bending motions. A strong core is needed to counter balance these forces.

With a focus on the core, a cyclist can generate more power and can sustain a higher level of intensity for longer periods. A stronger core also means less stress on the primary muscle movers and a delay in the build up of lactic acid. Even minor changes such as brake position can affect core stability. If the brake handle position is too low, the cyclist is forced to reach too far forward with his forearms. This reaching position forces the cyclist to raise his head, forcing the pelvic girdle posterior. This position can cause a restriction in several key muscles in the core, thus reducing performance. The ideal position for the forearms is to have the elbows bent and the forearms flattened out. In this position, the cyclist head drops into a more comfortable aerodynamic position, and the pelvis tilts forward. In this position, the cyclist is able to use all the core muscles with improved efficiency.


Now consider how a shortened rectus abdominis affects a triathlete's performance during running. Although opinions about the "ideal running form" vary greatly, most authorities will agree that the less energy expended, the more effective and efficient the running style will be.

Look straight ahead. Your eyes should be focused straight down the road on a point moving about 10 meters in front of you. This helps to keep you in a straight line. Swing your arms naturally. The angle at the elbow between your upper and lower arms should be about 90 degrees. Your hands should be loosely cupped, about belly level.
 Common Running Recommendations  How a Shortened Rectus Abdominis Affects Your Running
Run upright. Your back should be straight, roughly at a 90 degree angle to the ground. A shortened rectus abdominis will pull the runner's posture forward, causing a braking action that reduces running economy.
As the rectus is shortened, it pulls the chest forward, allowing gravity to pull the head down. In order to look straight ahead as instructed, the athlete wastes a considerable amount of force in trying to overcome the contracted rectus abdominis.
 As the shoulders move forward, a shortened rectus abdominis causes the arms to rotate internally. This makes keeping your arms relaxed at the recommended 90 degree angle much more difficult, reducing running economy.

When performing a biomechanical analysis, it is very common to see numerous imbalances of which the athlete is completely unaware. By video taping an athlete during activity, the practitioner can show and explain what is happening and then correct it.

When analyzing a runner, some of the most common biomechanical faults looked for are: 

Educating yourself on how the core works will help to avoid injury, improve your athletic performance and increase training efficiency. Far too often, people read the most popular book or take advice from someone who they think knows more than they do. This cookie cutter approach does not take into account a person's specific needs and goals. In my opinion, anyone who participates in any sport or activity should have a professional evaluate them for any weaknesses or poor movement patterns. I can't tell you how many patients have told me, “It just started hurting. I never did anything to it.” A simple evaluation can save you from repetitive stress injuries.


  1. McGill, S, Ultimate Back Fitness and Performance: Ontario. Wabuno Publishers. 2004. 
  2. Kendall FP, McCreary EK, Provance PG. Muscles: Testing and Function. 4th ed. Philadelphia: Lippincott Williams and Wilkins. 1993.